TJ Hydro Modified Assist Cylinder & Brackets for Currie Steering

Be the first to write a review

Note:

For a new install on a stock system using components from PSC you will need the following items in general.

Steering gear (our fittings are -6 on the pressure side and -8 for the return to the cooler)

High pressure line from pump to steering gear in -6

Low Pressure line from reservoir to Pump in -12

Pump -6 pressure line to steering gear -12 low pressure line from reservoir to pump inlet

Reservoir with -8 return -12 to pump

-8 Hose and fitting from return port on steering gear to cooler inlet (we supply the adapter and -8 push lock fitting at the cooler inlet) Typical fittings are -8 straight or 45 at the gear and the same at reservoir return port depending on how the reservoir is mounted.

-8 Hose and fitting from reservoir to cooler outlet (we supply the adapter and -8 push lock fitting at the cooler outlet)

-6 pressure lines from ports on side of steering gear to assist cylinder. (we supply the modified cylinder and hardware to attach it to the axle and draglink)

Typical fittings used for the cylinder are 3 -6 90° Field Serviceable fittings and 1 -6 45° Field Serviceable fitting with about 7’ of hydraulic hose on a rig with 4” of lift

TJ Hydro Modified Assist Cylinder for Currie Steering with Axle Side Bracket Kit and Drag Link Bracket Kits

TJ Hydro Modified Assist Cylinder for Currie Steering. The Assist Cylinder has been modified to be short enough when fully collapsed to fit in the draglink location and clearanced to fit in the stabilizer mount.

Includes: