Shop Jeep Steering

Below are the steering components that we offer.   We don't offer "Custom Kit's", so please don't ask.

For a new install on a stock system using components from PSC you will need the following items in general.

Steering gear (our fittings are -6 on the pressure side and -8 for the return to the cooler)

High pressure line from pump to steering gear in -6

Low Pressure line from reservoir to Pump in -12

Pump -6 pressure line to steering gear -12 low pressure line from reservoir to pump inlet

Reservoir with -8 return -12 to pump

-8 Hose and fitting from return port on steering gear to cooler inlet (we supply the adapter and -8 push lock fitting at the cooler inlet) Typical fittings are -8 straight or 45 at the gear and the same at reservoir return port depending on how the reservoir is mounted.

-8 Hose and fitting from reservoir to cooler outlet (we supply the adapter and -8 push lock fitting at the cooler outlet)

-6 pressure lines from ports on side of steering gear to assist cylinder. (we supply the modified cylinder and hardware to attach it to the axle and draglink)

Typical fittings used for the cylinder are 3 -6 90° Field Serviceable fittings and 1 -6 45° Field Serviceable fitting with about 7’ of hydraulic hose on a rig with 4” of lift